This CNC kit is made by allpanga.com
Other additions of items are also possible upon the demand of the customer.
DC 24V 15A 360W Power Supply
- Input: AC 110/220V /-15%
- Output: DC 24V, 15A
- Power: 360W
Shinano Kenshi SST59D5300 2 Phase Hybrid Stepper Motor 59D SERIES
- Current 3A/Phase
- Dimension 77.5mm
- Leads 6 (Note: 4 leads are adjustable according to driver)
- NEMA 23
- Shaft Diameter 8mm
- Weight 1.1kg
Driver Board CNC Router Single 1 Axis Controller Stepper Motor TB6560 3A
- Working voltage: DC 10-35V
- Rated maximum output: ± 3A, peak 3.5A.
- Size:75 x 50 x 33mm
5 Axis CNC Breakout Board with Optical Coupler
- Full support for MACH3 and other support parallel port control computer software.
- USB power and external power supply phase separation to protect computer security.
- The external wide voltage input, 12-24V, and have the anti-reverse function.
- All of the input signal through all-optical coupling isolation can be accessed by emergency stop, the knife, spacing, etc., to protect computer security.
- One relay output port can control the spindle switch. P17 output port to port.
- All the way through optocoupler isolated 0-10V analogue voltage output can control the drive with a corresponding analogue interface to control the spindle speed. Output port for the P1 port.
- Open to all 17 ports, the drive can be accessed with optocoupler can be controlled 5-axis stepper motor.
- P1 as the PWM output can be controlled with optocoupler input spindle governor.
- Can be accessed by the common cathode or common anode, the input level for the drive to 5V.
Good quality TB6560 driver is included in this kit. Which is recommended and used by us for projects because of its high quality and performance.
3 x Motors
3 x Motor wires with connectors
3 x TB6560 Driver
3 x Limit switch
1 x Parallel port cable
1 x USB CNC Breakout Board
1 x Breakout board wire
1 x 360W Power Supply