n1, Use original chip CP2102, generate COM port after installing the driver.
n2, The standard input MICRO MINI-USB cable connected to the computer USB interface, with 3.3V and 5V two power output
n3, With a resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download
n4, On-board status indicators, receiving indicator properly installed drive status indicator remains, send and receive indicator flashes when the communication with run LED indicator.
n5, Supports baud rates from 300bps ~ 1Mbps between
n6, The communication format support: (1) data bits 5, 6, 7, 8. (2) support 1.5, 2 stop bits. (3) odd, even, mark, space, none parity
n7, Supported operating systems: windows 8.1 / 7 / vista / XP / 98, Mac OS-X / OS-9, Linux
n8, USB seat MICRO MINI-USB interface block
n9, With DTR trigger signal output can be directly Arduino pro mini ATMEGA328P and other Arduino board download traffic.
n10, Module size: 15.7mm * 21.2mm super small.
n1. Embedded USB transceiver, no external circuit device
n2. Containing clock circuit, no external circuit device
n3. Contains power-on reset circuit The on-chip voltage regulator within the 3.3V output
n5. Meet the USB2.0 specification requirements
n6. SUSPEND pins support USB suspend state
n7. Asynchronous serial data bus compatible with all handshakes and modulation controller interface signals
n8. Support data format is 8 data bits, 1 stop bit and the parity bit
n9. Connotation 512 byte receive buffer and 512 byte transmit buffer
n10. Supports hardware or X-ON / X-OFF Handshake