CP2102 USB 2.0 to TTL UART Module 6Pin Serial Converter STC Replace FT232 Module

330.00

Description

Brand: new
n
nPCB Dimensions: 26mm X 15mm
n
nColor: Black
n
nWeight: 4g
n
nwith self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
n
nwith three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
n
nwith 3.3V and 5V dual power output
n
npin leads to all sorts of useful
n
nwith reset signal output, etc. directly to the Arduino board Promini download!
n
nSupported operating systems:
n
nWindows 98/Me/2000/XP/7
n
nMAC OS-9
n
nMAC OS
n
nX-Windows CE
n
nLinux 2.40 or later
n
nFeature:
n
n1.included USB transceiver, without external circuit device
n
n2.includes a clock circuit, no external circuitry is
n
n3.includes power-on reset circuit
n
n4.chip 3.3V voltage regulator output voltage can be
n
n5. Meet the USB2.0 specification requirements
n
n6.SUSPEND pin supports USB suspend state
n
n7.asynchronous serial data bus compatible with all handshake and modulation controller interface signals
n
n8.Supported data format is 8 data bits, 1 stop bit and parity bits
n
n9.connotation 512 byte receive buffer and 512 byte transmit buffer
n
n10.Supports hardware handshaking or X-ON/X-OFF
n
nCP2102 its high integration, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART), supports full-featured modem signals, without any external USB device. CP2102 with other USB-UART adapter circuit works similar to the PC through the driver’s USB port into a virtual COM port in order to achieve the purpose of expansion.

Reviews

There are no reviews yet.

Be the first to review “CP2102 USB 2.0 to TTL UART Module 6Pin Serial Converter STC Replace FT232 Module”

Your email address will not be published. Required fields are marked *

X