Stepper Driver for DC stepper motor.
nRated to 48v at 5amps, Recommended 36v at 3.5amp.
nThis is an entry level driver aimed at those with a restricted budget. Will connect to almost any breakout board and suitable for most NEMA 17, 23, 24 and low end 32 stepper motors.
nToshiba TB6600 Chip set
nInputs: DC+, DC-, Pulse+, Step+, Enable+ and Common-
nOutputs: A+, A-, B+ and B-
nInput voltage from 12v to 48v DC (Recommended 36v)
nOutput amperage can be set to: 0.2, 0.6, 1.2, 1.8, 2.5, 3.3 4.2 or 5.0 Amps
nStepper motor steps can be divided by 1(full step) 1/2, 1/4, 1/8 or 1/16 to set your cutting resolution.